Polyester Laminating Resin

Laminating resin is great for wetting out fiberglass fabrics and keeping them in position during layups

Tackiness is a good thing when you’re doing a fiberglass layup and need to keep building layers without having them harden up on you. TotalBoat Polyester Laminating Resin will not cure on its own in direct contact with air. It contains no wax to prevent creation of an oxygen barrier that would cause it to cure, so it stays tacky and won’t sag while you’re building up layers. Its viscosity is ideal for wetting out fiberglass mat and cloth. Apply a final coat of TotalBoat Polyester Finishing Resin (which does contain wax) that cures to a hard, tack-free finish ready for sanding, painting, or gelcoating.

Gel time depends on amount of catalyst admixed

The following table indicates approximate gel times @ 70°F. Adjust the catalyst level to slow down or speed up gel time. Cooler temperatures may require a higher percentage of catalyst than warmer temperature conditions.

Polyester Laminating Resin Details

• Base coat resin for laminating applications
• Surface remains tacky so layers of fiberglass mat or cloth adhere to each other better during laminating.
• Will not sag on vertical surfaces.
• Does not require sanding between coats, or before a final coat with a polyester finishing resin.
• Contains no wax.
• Requires a final coat of polyester finishing resin containing wax to cure to a hard, tack-free finish.
• Application: Brush or plastic spreader
• Hardener: MEKP (methyl ethyl ketone peroxide), included
• Sizes: Available in Quart, Gallon, and 2-Gallon Kits